Mountain Top Roll

  • mt-roll-feature
  • mt-roll-1
  • mt-roll-2
  • Izusu-023
  • mt-roll-3
  • mt-roll-4
  • mt-roll-feature
  • mt-roll-1
  • mt-roll-2
  • Izusu-023
  • mt-roll-3
  • mt-roll-4

The Mountain Top Roll or MTRoll (also known as the roller shutter) is a highly functional and good looking retractable tonneau cover made of aluminium. It has multiple locking positions and can be operated easily with a pull strap. It also allows users to easily adjust the spring tension to change the speed of opening and closing. Using non-drill clamps, it is attached securely to the truck bed securing the cargo area helping to keep it dry and clean.

Cargo Carriers and Sport Bar are accessories to the Mountain Top Roll.

The Mountain Top Roll is compatible with all types of Mountain Top supplied under-rail bedliners and the Bed X-Tender.


ACCESSORIES:   / 


pdf_download_32x32Installation manual for Mountain Top Roll
pdf_download_32x32Installation manual for Mountain Top Roll, with tailgate lock
pdf_download_32x32Installation manual for Mountain Top Roll – Mitsubishi
pdf_download_32x32Installation manual for Mountain Top Roll – Nissan

pdf_download_32x32Maintenance manual for Mountain Top Roll

pdf_download_32x32Maintenance manual for Mountain Top Roll (VW Wildtrak)

Push buttons and tracks must be lubricated every 3-6 months with lithium grease or equivalent.

To gain the full potential from powder coated and anodized aluminium, ongoing maintenance procedures should be followed. The effect of atmospheric pollution, general dirt and grime and airborne salt deposits can all accumulate over time, and must be removed at regular intervals. As a general rule, powder coated surfaces should be cleaned every 6 months. In areas where pollutants are more prevalent or in exposed coastal areas a more frequent cleaning program should be carried out (e.g. every three months).

When cleaning, use dilute solution of mild, neutral liquid detergent, e.g. dish washing detergent, and warm water and a soft, lint free cloth or brush. Do not use abrasive cleaning tools such as steel wool, hard brushes, abrasive scourers, as these may damage the coating surface and change the color or gloss levels of the finish. Rinse soap foam off thoroughly with fresh water, and dry with a clean cloth. It is vital that any other chemicals such as petrol, strong alkaline or acid are NOT used on the surface.

Periodically check the housing and drain tubes for any debris and make sure to remove anything that could block the drain. Before removing the housing lid, make sure the cover is closed and latched to the tailgate lock-strap.

Fitting of Mountain Top Roll (standard)
Watch it here

Fitting of Mountain Top Roll on a Ford WildTrak
Watch it here

Replacement of flocking sealing on Ford Wildtrak
Replacement of flocking sealing standard roll
Replacement of locking barrel
Replacement of locking handle
Replacement of locking pins
Replacement of main spring on Mountain Top Roll
Replacement of rear profile

pdf_download_32x32Download application list for Mountain Top Roll

pdf_download_32x32Download spare parts list for Mountain Top Roll

pdf_download_32x32Download spare parts list for Mountain Top Roll, Ford Wildtrak